Completed Jobs in the Greater Detroit, MI area
Get a Free EstimateCompleted Jobs by Basement Waterproofing of Michigan
Following jobs are completed by Basement Waterproofing of Michigan . We do not publish customer’s contact information to protect their privacy. If you have any questions regarding any of the jobs or need references, please call us.
We injected the crack so that it would prevent further damage to their home. This is covered by our Basement Waterproofing of Michigan lifetime warranty against leakage on all repairs made by BWM.
The system he purchased was the Grate Drain sub floor drainage system for the full perimeter of his basement. This comes with the Transferable Life of House Warranty. The Flexi Flange and Thermal Finish Shield were included in the total system cost for the entire perimeter. He had the Level Two Ground Water Control System installed. This comes with a dual, closed, sump pump system that has 2 liners, 2 fast pumps, a Water Alarm and the fast sump inverter with 100AMP, 12 Volt Battery. He also wanted to add the Santa Fe Classic dehumidifier. We did have to remove the portion of the drywall to be able to access the leaking portion and install the vapor barrier. But now his basement will be water and damage free! He also qualifies for the Full Wall Protection Healthy Basement Certificate. Rob and his family can breath easy in their new Healthy Home!
These are the before and after pictures of some of the rod holes and crack injections that needed to be repaired in our customers basement. We also installed a full wall, crack shield to protect from rod hole leaks in the future.
BWM injected two cracks in the customers basement, from end-to-end. We also injected six rod holes that had been leaking. Lastly, we installed a full wall crack shield on the large crack that went to the floor. To do this, we broke out the concrete in front of the crack and removed it. We dug down to expose the footing. Sealed the crack with epoxy. Next, we installed a carbon fiber mesh to strengthen the wall. We installed white wall panel to seal off the repair and to redirect moisture under the floor. Last, we back-filled with gravel and re-concrete the space. The crack injection and crack shield are covered under a transferable warranty.
We installed a full perimeter Grate Drain system. It included the wall shield strip which is the vapor barrier. We used the one foot strip which provides for the sealed system and allows the option for full wall protection in the future, if necessary. The flexi-flange ties the vapor barrier into the drainage system. Also installed was the GrateSump, 1/3 hp pump with the GrateSump liner. GrateDrain comes with the transferable, life-of-the-house warranty.
We were able to fill the crack from top to bottom. We included injection of the 3 rod holes along the crack. This abated the leaking.
We injected the rod holes so she would not have any further leakage in those areas. This was a fairly quick and easy task. Sandy seemed happy that she would not be cleaning up water from her basement any longer.
We repaired her leaking basement wall crack by injecting it from the top of the crack to the bottom. This repair comes with a lifetime, transferable warranty. If she sells the home, the new homeowners can have the warranty put in there name by letting the office know when the sale is complete.
We broke out the concrete in front of the crack and exposed the footing. We, then, sealed the crack from the wall down to the footing. Next, we installed white wall panel to seal off repair and redirect moisture under the floor. Lastly, it was back-filled with gravel and finished with concrete. This service comes with a transferable lifetime warranty against water seepage.
We gave Richard and Julie two estimates. One to just inject the cracks that were leaking. Another estimate for our complete sub floor Grate Drain Perimeter Drainage System. They chose to go with the complete system because they didn't want to deal with future water issues in their basement. We cut into the drywall and installed the wall shield and flexi-flange to tie the vapor barrier into the drainage system. We also installed a 1/3hp sump pump. We back filled the system with gravel and then cement. We also warranty the Grate Drain system for the life of the home. The warranty is transferable to a new homeowner.
We gave Richard and Julie two estimates. One to just inject the cracks that were leaking. Another estimate for our complete sub floor Grate Drain Perimeter Drainage System. They chose to go with the complete system because they didn't want to deal with future water issues in their basement. We cut into the drywall and installed the wall shield and flexi-flange to tie the vapor barrier into the drainage system. We also installed a 1/3hp sump pump. We back filled the system with gravel and then cement. We also warranty the Grate Drain system for the life of the home. The warranty is transferable to a new home owner.
Pictures of the cracks and rod holes in customers basement before repairs by Basement Waterproofing of Michigan.
Pictures of rod holes and cracks in poured basement walls prior to repairs.
We filled the cracks from top to bottom. No water was coming in any longer.
We installed our fast pump with in GrateSump liner. It has a 1/3 hp pump that pumps up to 2400 GPH. This will help pump the rain water away from her crawl space and avoid any smell or moisture.
We provided this beautiful, Detroit home with a full Grate Drain basement system. It includes the complete sub floor drainage system and vapor barrier.
The water was leaking in through the homes original gas line. The gas line enters the home through the wall at the base of the main floor, in the ceiling of the basement. If the line has been completely disconnected, we can remove it from inside the wall and fill the hole. If it is still connected, then we will seal all around the hole on the outside to prevent moisture from entering the home.
BWM sent our specialized crack injection crew to stop the water from coming into the home. We also broke out the base of their fireplace, to expose the footing. Then we installed White Wall Panel to seal off repair and redirect moisture under the floor. We back filled with gravel and concrete to repair the floor.
Removal of a stamped concrete patio that was installed too high and resulted in water entering the basement. The foundation was then waterproofed and drains installed both next to the foundation and approx 15 ft out from the foundation to protect from future problems. Most of the work was done in January (one of the coldest days of the year) to prevent the problem, with follow up and final grading in spring after the thaw.
I had the Grate Drain system installed last summer in anticipation of finishing my basement. I went with the Grate Drain, which was more expensive than other options, because I was convinced that it would provide better protection and make the living space more comfortable.
Crawlspace encapsulation and basement waterproofing with dehumidifiers and new sump pumps.
We provided 2 crack injections, 22 feet of Grate Drain, Flexi Flange, Thermal Shield, Sump Pump and Liner.
Grate Drain Full Perimeter System. Remove stairs for installation. Replace the existing sump pump and run a new discharge.
We Supplied and installed "Grate Drain" subfloor drainage system, With Thermal Finish Shield and Flex-Flange. We also installed Grate Sump and Liner.
To prevent water from continuing to enter the home we installed a customer GrateDrain perimeter system. We installed a full Thermal Finish shield on the walls along the system to create a vapor barrier and protect against moisture, mold, and mildew. The homeowner also had a sump pump system installed to collect the water from the dual chambered Grate Drain System
The holes in the wall causing leakage were rod holes. Those holes were repaired to prevent water from leaking into the home.
Performed a Crack Injection, filling crack from top to bottom and sealing it off. Water will no longer leak into the basement.
To fix the cracks in the home, we performed two crack injections. These injections fill the cracks from top to bottom sealing them, preventing any future water leaking in. Accordingly, we also repaired two rod holes so water does not leak through there as well.
To fully waterproof the Ferndale homeowner's basement we installed the Grate Drain system. This system goes under the basement floor next to the foundation. The Grate Drain system collects water via a punched dual chamber system and guides water to a sump pump. Thermal Finish shield was then installed to create a vapor barrier and protect against mold and mildew.
In order to stop the leak we performed a crack injection as well as repaired one rod hole. The crack injection will fill the crack from top to bottom, fully sealing it. Through both of these fixes, water should no longer be entering the basement.
To repair the cracks in the Sterling Heights homeowner's basement, we performed a crack injection and repaired 7 rod holes. This will prevent any water from leaking into the home.
To waterproof the basement and prevent water from entering the home we installed the Grate Drain perimeter system. This system is a sub floor drainage system with dual chambers which is able to collect more water and resists clogging. A sump pump was then hooked up to the Grate Drain system to collect all the water. Thermal Finished shield was installed on the walls to create a vapor barrier.
In order to encapsulate the Royal Oak homeowner's basement we installed a new crawl space door as well as Crawl Shield and Dimple Shield. This installation is covered by a 25 year transferable warranty. The dimple shield will divert water while the crawl shield which is above the dimple shield, will stop the infiltration of water and gases from going into the home.
To stop all water from entering we performed a crack injection. Accordingly we also repaired 4 rod holes. In doing this the crack was sealed from top to bottom to prevent future water leaking.
We performed a panel crack repair to seal crack. To do this we broke out the concrete in front of crack to dig down to the home's footing. A panel was then installed to seal off repair and re direct any moisture.
To prevent rod holes from leaking, we filled 5 rod holes in the Harper Woods basement.
To repair the cracks for a Clinton Township Homeowner, we performed two crack injections and one rod hole repair. This will prevent water from leaking into the basement in the future. We also installed a new sump pump to replace their old one.
To repair the two vertical cracks and prevent water from entering the Lake Orion home, we performed a crack injection. By doing this we sealed the cracks from top to bottom preventing any future water from leaking.
Homeowner in Leonard, MI had water entering their home. Looking to waterproof their basement, they had the Grate Drain perimeter system installed and connected to their existing sump pump to fully waterproof their basement.
To waterproof the basement we installed the Grate Drain perimeter system. This is a sub-floor drainage system that will guide water to a sump pump. The customer had an existing sump so we hooked the new system up to it.
To prevent water leaking into the Troy Homeownwer's basement we repaired 7 leaking rod holes. This repair will prevent the rod holes from allowing water to enter the home in the future.
Homeowner noticed water coming into the basement but saw no cracks. Upon looking at the Warren homeowner's basement it was discovered that 90% of the moisture was in the Chimney area. We performed a chimney clean out to redirect the water under the home rather than it coming through the walls.
In order to fix the crack in the crack in the 2005, Belleville home we performed a crack injection. The crack injection will stop water from coming into the home by filling the crack from top to bottom.
Customer in Waterford, Michigan interested in encapsulating their crawl space. We installed Crawl Shield to fully encapsulate the space.
Basement Waterproofing of Michigan installed Crawl Shield to encapsulate the Waterford homeowner's crawl space. Dimple Shield was installed underneath the white crawl shield as well as insulation. This process will fully encapsulate the crawl space.
To waterproof the basement and prevent water from coming in, we installed the Grate Drain system. This system collects all the water that enters the home and directs it towards the storm clean out.
WE provided an inspection for the customer. We looked at the source of the water and offered solutions to waterproof the basement.
To waterproof the basement before the homeowners remodeled we installed the Grate Drain perimeter system which exists under the floor to collect any water. This system was connected to the newly installed Sump Pump. The job was finished with the installation of a thermal finished shield on the walls to stop moisture from entering the home and prevent against any mold or mildew.
We performed a crack injection to repair and fully seal crack from top to bottom. This will prevent water from coming in the future and allow the customers to finish remodeling their home.
Customer had a leaking wall in their finished basement and was looking to waterproof their basement. We installed the Grate Drain system to guide water entering their home to an existing sump pump.
Upon removing the wall a crack was discovered, the source of the water leakage. We installed the Grate Drain system to direct water to their existing sump pump. Thermal Finish Shield was installed along the wall to provide a water barrier to prevent moisture from entering the home and help guide any water to the Grate Drain system.
Customer called after they found two rooms in their 1930s Detroit home had water coming. They were interesting in waterproofing their basement to redirect the water coming into their home and prevent flooding.
To fully waterproof the basement we installed the Grate Drain perimeter system. This system is a sub floor system and will guide water that enters the home into the newly installed sump pump. Dimple shield was also installed on the Detroit basement walls to guide water to the grate drain system. Thermal Finish shield was lastly installed to full cover walls to prevent any water from entering the home and prevent against any mold or mildew.
Installed the Grate Drain system to fully waterproof the basement. The Grate Drain system is a sub floor drainage system designed to send water to the newly installed Sump Pump.
Installed Crack Shield to repair crack in Roseville basement wall. WE dug out concrete to expose the home's footing and sealed the crack from top down the wall to the footing. A white wall panel was installed to seal off repair and redirect moisture to prevent leakage into the home.
Waterproofed the basement by installing the Fast Pump, sump pump system. The Grate Drain perimeter system was installed to help move water to the sump pump to waterproof the basement. Thermal Finish Sheild was installed to create a vapor barrier, save energy, and protect against mold and mildew. With the installation of these system the basement will be waterproofed and water will no longer come into the home.
Waterproofed the basement by installing the Grate Drain system , which is a perimeter, sub floor drainage system. The Level Two Ground Water Control system was also installed, which features a closed sump system and a water alarm. Thermal Finish Shield was installed to create a vapor barrier and protect against mold and mildew. These systems will stop all water leakage the customer was previously experiencing and prevent this from happening in the future.
Performed a crack injection to repair crack along foundation wall. This will prevent leaking in the future.
Installed Grate Sump, sump pump in crawlspace. This will prevent excess water and flooding in the crawl space.
Although the previous company melted installing drain tile, we installed the grate drain system to waterproof the basement. The Grate Sump, sump pump was also installed as well as a layer of Thermal Finish Shield along the walls. The Thermal Finish Shield will create a barrier for moisture, mold, and mildew.
Performed a crack injection to repair crack in wall. This repair will prevent it from leaking in the future.
Performed a crack injection to repair and seal crack to prevent water from leaking back into basement.
Performed a Chimney Clean out to install white wall panel to seal repair and re direct moisture underneath the floor.
Installed Thermal Finish Shield to protect against potential wall leaks, mold and mildew. The Grate Drain Perimeter System and Level Two Ground Control Sump Pump system were also installed. The Santa Fe Classic dehumidifier , bubbler pot, and downspout extension were also installed to help fully waterproof the basement.
Installed the Grate Drain perimeter system and the Level Two Ground Water Control System which features a sump pump, to waterproof the basement. Also installed the Santa Fe Classic dehumidifier to reduce moisture levels in the basement.
Filled rod holes in the foundation to seal them and prevent them from leaking in the future.
Installed a Kevlar Neck tie to permanently stop top wall from tipping in. A crack injection was also performed to stop water from coming in when it rains.
A crack injection was performed to seal leaking crack and prevent it from letting water into the home.
Performed a crack injection to seal 6ft crack and prevent it from leaking in the future.
Installed Grate Drain perimeter system and the Level Two Ground Water Control system. The level two system features a closed sump system, water alarm, and more. Thermal Finish Shield was installed to seal off wall and protect against moisture, mold, and mildew. A Crack injection was also performed to permanently seal crack and prevent it from leaking in the future.
Installed Grate Drain perimeter system and Sump Pump to waterproof basement. Thermal Finish Shield was installed with the sump pump and Grate Drain system. The Thermal Finish Shield will protect against any future leaks, mold, mildew, and help save energy.
Installed Drain Tile to collect water and divert it to the newly installed sump pump. This will prevent the crawl space from flooding in the future.
Performed a crack injection to stop water from coming into the basement permanently.
Performed multiple crack injections to fill various cracks and prevent them from leaking permanently. Also installed the Grate Drain Sub Floor Drainage System and a Sump Pump to fully waterproof the basement.
Installed crack shield in basement. This process seals the crack and protects against water seepage.
Installed Fast Pump-Sump Pump and the Grate Drain Perimeter System to fully waterproof the basement.
Installed sump pump and Grate Drain perimeter system to waterproof basement. Thermal finish shield was installed to create a vapor barrier and protect against mold, mildew, humidity, and potential wall leaks.
Installed the Grate Drain Perimeter System to create a sub floor drainage system to prevent water damage. Also installed a sump pump to fully waterproof the basement.
Installed the Grate Drain perimeter system, sump pump, and full thermal shield to fully waterproof the basement to protect again water damage and mold and mildew.
Performed a crack injection to fill crack and prevent water from leaking into the basement.
Performed a crack injection by injecting crack from top to bottom to stop water from coming into the basement.
Performed a crack injection to fill in cracks from top to bottom to stop water from coming into the basement. Also installed carbon fiber straps to permanently stop all movement of the foundation wall.
Installed the Grate Drain perimeter system, sump pump, and thermal finish shield to waterproof the basement, prevent any further leaks and protect against mold and mildew. Also installed Crawl Shield to fully encapsulate the crawl space and protect against soil gases such as radon.
Installed Crawl Shield which is a state of the art basement liner designed to stop moisture and soil gases from coming into the crawlspace. This system fully encapsulates the crawlspace.
Installed Grate Drain System and Sump Pump to waterproof basement.
Installed the Grate Drain Perimeter System and Sump Pump. Filled in Rod Holes and installed a Thermal Finish Sheild to create a vapor barrier to protect against moisture, leaks, mildew, and save the customer energy.
Installed Grate Drain system and Sump Pump to waterproof basement fully.
Filled crack from top to bottom via a crack injection to stop water from coming into the basement.
Performed a crack injection and filled in rod holes to prevent water from coming into the basement.
Installed Grate Drain system and sump pump to waterproof the basement. Thermal Finish Shield was also installed to create a vapor barrier and save the customer energy and protect against mold and mildew.
Performed a crack injection to stop water from coming into the basement. Also filled rod holes in foundation wall to prevent further leakage.
Performed a Crack Injection, filling crack from top to bottom to stop water from coming into the basement.
Installed the Grate Drain perimeter system, Sump Pump and thermal finish shield to waterproof the basement. Also installed Carbon Fiber Straps along wall to permanently stop all movement of the foundation wall.
Installed a Grate Drain Perimeter system to create a sub floor drainage system and waterproof the basement.
Performed a crack injection to stop water coming into the basement by filling the crack.
Performed a crack injection to fill in crack in foundation wall.
Installed the Grate Drain perimeter system and Sump Pump along with a Thermal Finish Shield. These solutions will waterproof the basement.
Performed a crack injection to fill vertical crack to prevent future water leakage.
Performed a crack injection to fill crack from top to bottom to prevent water from coming into basement.
Performed a crack injection to fill crack in wall from top to bottom. Preventing crack from spreading or leaking in the future.
Installed Grate Sump Pump as well as the Grate Drain perimeter system to fully waterproof the basement. Thermal Finish Shield was also installed to create a vapor barrier and protect against mildew, mold, and potential wall leaks.
Installed Carbon Fiber Straps to permanently stop all the movement of the foundation wall. This will remedy the bowing of the foundation walls. Also installed the Grate Drain perimeter system and the Grate Sump Pump to waterproof basement.
Performed a crack injection to seal crack and prevent water from coming into the basement in the future.
Installed a Fast pump with GrateSump Liner (sump pump) as well as the Grate Drain perimeter system to waterproof the basement. Thermal Finish Sheild was also installed to to act as a vapor barrier as well as save energy and protect against moisture , mold, mildew, and potential wall leaks.
Installed the Grate Drain perimeter system to waterproof the basement.
Provided a Crack injection to stop leak in customer's basement wall.
Performed a crack injection to fill crack in basement wall to prevent further leakage.
Installed a sump pump with Grate Sump liner, as well a Grate Drain system, and a thermal finish shield.
Performed a crack injection to fill crack to prevent water from coming into the basement in the future.
We provided an outside excavation crack repair to fill in crack with Hydraulic cement and seal the foundation wall. Installed a heavy duty vapor barrier to prevent moisture.
Installed Grate Drain system as well as a sump pump system to waterproof basement. Also installed Thermal Finish Sheild to create a vapor barrier and reflect heat back into the basement as well as save energy. This will also protect against mold, mildew, humidity, and potential wall leaks.
Installed Crack Sheild to repair crack and redirect moisture.
Installed a full wall of crack shield which features a carbon fiber mesh sealed with epoxy to seal crack and strengthen wall.
Installed Grate Drain perimeter system to create a sub-floor drainage system. Also installed a sump pump system which features a water alarm.
Performed a crack injection to seal crack and prevent water from coming through in the future, allowing customer to finish basement.
Installed Carbon Fiber straps to permanently stop all movement of the foundation wall. Also installed a Grate Drain Perimeter System for the customer to create a sub floor drainage system as well as installing a sump pump system for ground water control.
Performed a chimney clean out and installed a white wall panel to seal of repair and redirect moisture under the floor. Also performed a crack injection, to stop water from coming into the basement.
Provided crack injection to fill crack tom top to bottom to prevent water from coming into the basement.
Sealed crack from top to bottom and installed white wall panel to seal off repair and create crack shield.
Found a crack in basement wall and installed Crack Sheild, sealing crack from top to bottom. Installed carbon fiber mesh to strengthen wall and a white wall panel to seal off repair and to re -direct moisture under the floor.
We injected the crack in the basement to fill it and prevent water from leaking through in the future.
We installed a level two ground water control system that features a sump pump.
Installed Kevlar Neck Tie to stop top wall from shifting and create an anchoring system to stabilize wall movement. Filled in Rod Holes to prevent further water leakage and provided a crack injection to fill in crack along basement wall.
Installed Grate Drain sub-floor drainage system as well as a sump-pump for ground water control. We also installed a Thermal Finish Shield to be a vapor shield to prevent moisture as well as provide energy savings.
Installed a full wall of crack shield to seal crack,repair damage and prevent any further leakage.
Provided a crack injection to fill crack and prevent further water leakage as well as repairing rod holes.
Provided a chimney clean out to seal crack and prevent further leakage.
Installed Grate Drain perimeter system to create a sub-floor drainage system. Also installed a fast-pump with liner and thermal finish shield.
Provided panel crack repair to seal crack and prevent leakage. Installed Sump Pump.
Provided a crack injection to prevent water from coming into the basement.
Installed Grate Drain , sub-floor drainage system as well as a sump pump. Also installed a thermal finish shield to seal installation.
Provided a crack injection to repair crack from top to bottom.
Installed Grate Drain perimeter system to waterproof home to create a sub-floor drainage system. Installed thermal and wall shield to prevent moisture from further entering home.
Installed Grate Drain system to provide sub-floor drainage.Also installed a vapor barrier to prevent moisture entering household.
We offered a panel crack repair to seal crack from top of the wall to the bottom. Sealed panel to finish repair and prevent further leakage.
Provided chimney clean out and panel crack repair to seal repair to prevent further leakage.
Provided crack injection to wall to fill crack and prevent spreading.
Reworked the cement wall around the I beam to ensure a solid draft-proof seal from the outside.
Provided Grate Drain sub-floor drainage system and sump pump. Also installed thermal shield vapor barrier along walls to waterproof and prevent further leakage.
Installed Steel I-Beams to provide additional support to the foundation of the basement. Helping reinforce the foundation walls to prevent shifting.
Installed Grate Drain sub floor drainage system. Also installed level one ground water control system that included sump pump and water alarm as well as installing wall shield to protect basement walls.
Provided crawl space encapsulation as well as insulation and debris removal for crawlspace.
Inject crack from top to bottom to stop water from coming into the
basement.
We provide crack injection from top to bottom to stop water from coming into the basement.
Basement Waterproofing of Michigan removed debris from the crawl space and drained the water prior to starting the installation. We installed a full perimeter drainage system and a sealed GrateSump. We also installed a full Insulation Package, a new access door, and Crawl Shield Elite Encapsulation System to seal the earth and its elements from her home.
Basement Waterproofing of Michigan was able to identify the issues early enough to prevent outside excavation and a possible wall replacement. We installed eight fortress carbon fiber straps to stabilize the foundation and to stop and further damage and movement to the other basement walls.
Basement Waterproofing of Michigan installed space support jacks to lift up the sagging floors. We installed two-inch foam board with spray foam along the perimeter and 90 mil thick Crawl Shield Elite Encapsulation System to seal the earth and its elements from her home. We also installed Crawl Shield Elite Silver siding on the walls to cover all the seams on the foam board. This siding reflects 97% of the heat back into the crawl space.
BWM also installed a full perimeter drainage system and discharge line to ensure the water ran to the Grate sump pump we had installed. The Grate Sump Pump Ms. Kasimecek chose, comes with a Power Inverter Battery Back-Up which kicks in if her power ever goes out.
Basement Waterproofing of Michigan's installers removed and hauled away all of the moldy paneling. They installed a fully closed Grate Drain Perimeter with full wall product, and one grate sump pump.
The following weekend after the installation, we had a big rain storm. She gave us a call to let us know the system was working wonders and how excited she was that she no longer had to worry about mopping up her basement!
Basement Waterproofing of Michigan installed a full closed perimeter Grate Drain System as well as two closed grate sump pumps, which are made specifically to prevent cross contamination of iron bacteria.
Basement Waterproofing of Michigan (BWM) provided Ms. Goode with a closed drain system by Grate Products. We also installed wall material to help reflect heat back inside to prevent mold and moisture. BWM also installed a sump pump to make sure that any and all water was removed from the basement.
Basement Waterproofing of Michigan's installer's did an inside crack shield repair which sealed the crack to prevent any further water from seeping inside.
Basement Waterproofing of Michigan installed 80 feet of Fast Drain, 80 feet of Thermal Finish Shield, Full Wall Product, a GrateSump Pump, and a FastSump Power Inverter Back-up.